View HAL1820_4822911.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PRODUCT INFORMATION
HAL 1820
July/2009
HAL(R) 1820 Programmable Linear Hall-Effect Sensor Family
The HAL 1820 is a new member of the Micronas family of programmable linear Hall sensors. The HAL 1820 is a universal magnetic field sensor with a linear analog output based on the Hall effect. The IC can be used for angle and linear measurements if combined with a rotating or moving magnet. The major characteristics like magnetic field range, sensitivity, offset (output voltage at zero magnetic field), and the temperature coefficients are programmable in a non-volatile memory. The HAL 1820 is programmable by modulating the supply voltage of the sensor. No additional programming pin is needed. The easy programmability allows a 2-point calibration by adjusting the output signal directly to the input signal (like mechanical angle, distance, or current). Individual adjustment of each sensor during the customer's manufacturing process is possible. With this calibration procedure, the tolerances of the sensor, the magnet, and the mechanical positioning can be compensated in the final assembly. This offers a low-cost alternative for all applications that presently need mechanical adjustment or laser trimming for calibrating the system. The sensor is designed to be used in automotive or industrial applications. It operates in a wide junction temperature range from -40 C up to 170 C. The HAL 1820 is available in the very small leaded package TO92UA and in the small SMD package SOT89B.
V V V V V
Operates with static magnetic fields and dynamic magnetic fields up to 1 kHz Overvoltage and reverse-voltage protection on VDD pin Magnetic characteristics extremely robust against mechanical stress. Short-circuit protected output
Features
V V V V V V V V V
Linear Hall-effect sensor with ratiometric analog output Various programmable magnetic characteristics with non-volatile memory Digital signal processing Continuous measurement ranges from 20 mT to 160 mT Temperature characteristics programmable for matching all common magnetic materials Programming via supply voltage Lock function and built-in redundancy for EEPROM memory Operates from -40 C up to 170 C junction temperature Operates from 4.5 V up to 5.5 V supply voltage
Major Applications
Due to the sensor's versatile programming characteristics and its high accuracy, the HAL 1820 is the optimal system solution for applications such as: - - - - - Contactless potentiometers Rotary position measurement Linear movement Current measurements Level measurements
PRODUCT INFORMATION
HAL 1820
Development Tools
For engineering and production purposes, Micronas offers an easy-to-use application kit:
July/2009
V V V
Micronas programmer board (HAL-APB V 1.3) LabVIEWTM programming software for Windows(R) 9x/2000/XP/Vista LabVIEW Sub VIs
Serial and USB Port
HAL Programmer Board
Fig. 1: Development tool setup
System Architecture
The HAL 1820 sensor is produced in a proven submicron CMOS technology. The HAL 1820 features a temperature-compensated Hall plate with choppered offset compensation, an A/D converter, digital signal processing, an analog output, an EEPROM memory with redundancy and lock function for the calibration data and the data register information, a serial interface for programming the EEPROM, and protection devices on all pins. The HAL 1820 is programmable by modulating the supply voltage. No additional programming pin is needed. The internal digital signal processing is a great benefit because analog offsets, temperature shifts, and mechanical stress do not degrade the sensor accuracy.
GND VDD Internally stabilized Supply and Protection Devices
Temperature Dependent Bias
Oscillator
Overvoltage, Undervoltage Detection
Protection Devices
Switched Hall Plate
A/D Converter
Digital Signal Processing
D/A Converter
Analog Output
50
OUT
EEPROM Memory
Lock Control
Fig. 2: Block diagram of the HAL 1820
All information and data contained in this product information are without any commitment, are not to be considered as an offer for conclusion of a contract, nor shall they be construed as to create any liability. Product or development sample availability and delivery are exclusively subject to our respective order confirmation form. By this publication, Micronas GmbH does not assume responsibility for patent infringements or other rights of third parties which may result from its use.
No part of this publication may be reproduced, photocopied, stored on a retrieval system, or transmitted without the express written consent of Micronas GmbH. Edition July 7, 2009; Order No. PI000129_002EN
Micronas GmbH Hans-Bunte-Strasse 19 D-79108 Freiburg (Germany) P.O. Box 840 D-79008 Freiburg (Germany) Tel. +49-761-517-0 Fax +49-761-517-2174 E-mail: docservice@micronas.com www.micronas.com

▲Up To Search▲

Price & Availability of HAL1820

	To Download HAL1820 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .